|
|
(AMERICAN COMPANIES) : AMT
Prices may have changed on the official site. | Next page >> [ 1 ] 
Musiciansfriend | AMT Electronics AMT 404 Small Diaphragm Condenser Microphone PairThe AMT 404 Small Diaphragm Condenser Microphone Pair have a cardioid polar pattern and are designed for live sound reinforcement and studio applications. The 404's can withstand high sound pressure levels (SPL) and have an extended frequency response.The AMT 404 microphone pair is suitable for many applications including the overhead miking of musical instruments as well as choirs, speech, and vocalist of all types. The 404 pair is ideal for home recording applications and studios when a stereo setup is required. Engineered with the same natural qualities of all the AMT microphones the 404's include a hard shell carrying case and microphone clips for mounting on mic stands. The AMT 404 operates on phantom power. $239.00 - See more - Buy onlineIn stockSee larger image | | 
Musiciansfriend | AMT Electronics AMT 350 Large Diaphragm Condenser MicrophoneThe AMT 350 large diaphragm studio microphone is designed to record vocals and instruments on classic analog and the popular growing digital format. With a cardioid pattern, the 350 mic is designed to be used in front of guitar cabinets, acoustic guitars, vocals, and acoustic instruments. The AMT 350 incorporates an element nearly an inch in diameter with a thickness of 6 microns of gold on the diaphragm which gives it it's wide frequency range and stellar sensitivity.The AMT 350 is engineered to capture the most natural sound from the source in a controlled setting and was after the most expensive European large diaphragm microphones with emphasis on the sonic quality instead of additional features. The 350 has transparent and high definition detail down to subtle sonic qualities. The 350 mic is in an affordable price range allowing one to purchase in pairs for stereo overhead use as well. It's ultra low noise level allows it to compete with any studio microphone on the market. Comes complete with hard shell case and clip for mounting to a microphone stand. Requires phantom power. $279.00 - See more - Buy onlineOn orderSee larger image | | 
Musiciansfriend | AMT Electronics AMT System 1 Clip-On Condenser Microphone SystemThe AMT System 1 is a low profile condenser microphone that attaches to the bell of any flanged bell instrument such as horns, woodwind and brass, with a low mass clip. It can also clamp to many other musical instruments using the AMT "Universal Clamp". The microphone provides pure tonal reproduction while being unobtrusive. The System 1 microphone element is designed to be used with 40 or more instruments. It's response is designed to complement everything from brass and woodwinds to percussion. See the list below of all possible instruments to use it on.With the included clip portion of the "Universal Clamp", the System 1 microphone can be used on soprano, alto, tenor and bari sax, as well as trumpet, trombone, baritone horn, flugelhorn and tuba. The clip portion of the "Universal Clamp" is used for flanged bell instruments such as brass and woodwinds. It is a spring loaded design with a set screw that can reinforce stability on the horn if the player needs. The microphone attaches to the bell of the instrument, and is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise.The AMT System 1 features a flexible gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.The System 1 instrument mic is terminated by a 3.5mm plug which connects to a special metal belt pack preamp. The included belt pack has an XLR output. It is power by either 1 AA battery or phantom power. The belt pack powers the microphone system appropriately and needs to be used. $343.00 - See more - Buy onlineIn stockSee larger image | | 
Musiciansfriend | AMT Electronics AMT LSW Clip-On Mic for Shure SystemsThe AMT LSW Clip On Condenser Microphone is the ultimate in a woodwind or brass microphone and designed for direct connection to Shure or Sabine belt pack wireless systems. The mic system is meant to clip onto a flanged bell instrument. (Saxophones and Brass). The AMT LSW — Shure Microphone System is meant to be used by the player that requires a multi-channel professional level wireless system. (AMT Recommends the Shure ULXS14 and the ULXP14 wireless units). The AMT LSW allows the player to easily convert their direct connecting wireless microphone to any AMT preamp version. With a change in a cable, you can convert your LS from a "W"ireless setup, to a "Belt pack", or the AMT "Studio" series. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. It is powered via the wireless beltpack. This LSW system comes with microphone, universal clamp, case, and AMT disconnecting cable technology to allow the microphone to be used as "W"ireless or "BP" models if needed. (Additional cables for a variety of setups sold separately. The AMT Interface is also sold separately to allow connections for many wireless mic systems). Requires phantom power. $394.00 - See more - Buy onlineOn orderSee larger image | | 
Musiciansfriend | AMT Electronics AMT TA2W Double Condenser Mic for Shure SystemsThe AMT TA2W Shure is a low profile double condenser microphone System designed to work with Shure Wireless Systems. The first microphone attaches to the bell of instrument, the top or over the keys microphone is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise. The second microphone is placed in front of the bell of the microphone. Both microphones are on goosenecks for optimal placement. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.The AMT interface lets the artist use AMT microphones with most Shure wireless transmitters. In most cases the Interface will eliminate the beltpack that has come with your microphone system. The AMT Interface will replace the belt pack and can be fastened using velcro to the belt pack of whichever wireless system that you are using. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. Requires phantom power. $465.00 - See more - Buy onlineOn orderSee larger image | | 
Musiciansfriend | Applied Microphone Technology Wi5C Clip-On Wireless Transmitter BlueThe Applied Microphone Wi5C is a removable wireless clip-on transmitter and receiver with 16 selectable channels. The system currently works in conjunction with all AMT microphone systems that have disconnecting cable technology. Applied Microphone Technology's new disconnecting cables allow you to use their AMT microphone in many applications. AMT microphones can be ordered with beltpack-style preamps, studio or DI-style preamps, and the wireless direct connecting systems.You can use the Wi5C wireless transmitter in conjunction with several microphones and with the change of a cable, you can convert your microphone to either of the AMT preamps, or a wireless beltpack made by Shure, Sennheiser, and the new Wi5C wireless system. Microphone sold separately.Wi5C now works on these AMT models if they include a cable disconnect located on the microphone:Single microphone systems:LS, LS Studio, LSW - Shure, LSW - Sennheiser P800, P800 Studio, P800W - Shure, P800W - Sennheiser S15G, S15G Studio S25B, S25B-TP, SP25B, SP25B-TP M40, M51 ERT P43Double microphone systems:WS, WS Studio, WSW - Shure, WSW - Sennheiser TA2, TA2 Studio, TA2W - Shure, TA2W - Sennheiser $479.00 - See more - Buy onlineIn stockSee larger image | | 
Musiciansfriend | AMT Electronics AMT P800W Clip-On Condenser Mic for Shure SystemsThe AMT P800W trumpet microphone is a special version of the AMT P800. The microphone element remains the same with the same high level of quality that the P800 achieves however is specially adapted to work in this Shure configuration. AMT recommends the Shure ULXS14 and the ULXP14 Wireless Units. The AMT P800W - Shure Microphone System is meant to be used by the player that requires a mult-channel professional level wireless system. This application is a commonly preferred method used by many professional level sound engineers as well as sound companies on major tours.The AMT P800 Trumpet microphone system is the only system on the market specifically made to handle the highest SPL levels that a trumpet can reproduce. The AMT P800 microphone system features an element somewhere in size between a small and large diaphragm, which prevents even the loudest of trumpet players to not overload the microphone. AMT has developed there special "Off the bell" clamping system for this model which clamps to the lead pipe of the trumpet or flugelhorn.Requires phantom power. $506.00 - See more - Buy onlineIn stockSee larger image | | 
Musiciansfriend | AMT Electronics AMT P800W Clip-On Mic for Sennheiser SystemsThe AMT P800W — Sennheiser is a special version of the AMT P800W. The microphone element remains the same with the same high level of quality that the P800 achieves however is specially adapted to work in a Sennheiser configuration. The AMT P800 Trumpet microphone system is the only system on the market specifically made to handle the highest SPL levels that a trumpet can reproduce. The AMT P800 microphone system features an element somewhere in size between a small and large diaphragm, which prevents even the loudest of trumpet players to not overload the microphone. AMT has developed there special "Off the bell" clamping system for this model which clamps to the lead pipe of the trumpet or flugelhorn. The AMT — Sennheiser allows the player to easily convert their directly connecting wireless microphone to any AMT preamp version. With a change in a cable, convert your P800W from a "W"ireless setup, to a "Belt pack", or the AMT "Studio" series. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. Phantom power or 9-Volt battery is required. Comes with AP40 floor or "DI" style preamp, hardshell case, and AMT disconnecting cable technology to allow the microphone to be used as "Wireless" or "BP" models if needed. (Additional cables for a variety of setups sold separately. The AMT Interface is also sold separately to allow connections for many wireless systems.) $506.00 - See more - Buy onlineOn orderSee larger image | | 
Musiciansfriend | AMT Electronics AMT LS Low Profile Clip-On Condenser MicrophoneThe AMT LS is the ultimate in a woodwind or brass microphone. The system is meant to clip onto a flanged bell instrument (Saxophones and Brass). The LS mic in it's stock configuration is the perfect choice for the player that needs control of their own volume in a belt pack style setup. The AMT LS also allows the player to easily change to and from AMT different preamps and allows for direct connections to either Shure or Sennheiser beltpack transmitters. With a change in a cable, convert your LS from a beltpack style preamp, to a "Studio" series model, and then to AMT "Wireless setups". The microphone is suspended in a 4 point isolation ring reducing key and handling noise. Phantom power or 9Volt battery required. The instrument mic comes with BP40 beltpack style preamp, case, and AMT disconnecting cable technology to allow the microphone to be used as "Wireless" or "Studio" models if needed. (Additional cables for a variety of setups sold separately. AMT Interface also sold separately to allow connections for many wireless systems). $564.00 - See more - Buy onlineOn orderSee larger image | | 
Musiciansfriend | AMT Electronics AMT LS Studio Low-Profile Clip On Microphone SystemThe AMT LS is the ultimate in a woodwind or brass microphone. The system is meant to clip onto any flanged bell instrument (Saxophones and Brass). The LS in it's stock configuration is the perfect choice for the player that needs control of there volume in a belt pack style setup. The latest version of the AMT LS allows the player to easily change to and from AMT different preamps and allows for direct connections to either Shure or Sennheiser beltpack transmitters. With a change in a cable, convert your LS mic from a beltpack style preamp, to a "Studio" series model, and then to AMT "Wireless setups". The instrument microphone is suspended in a 4 point isolation ring reducing key and handling noise. Phantom power or 9Volt battery required. Comes with BP40 beltpack style preamp, case, and AMT disconnecting cable technology to allow the microphone to be used as "Wireless" or "Studio" models if needed. (Additional cables for a variety of setups sold separately. AMT Interface also sold separately to allow connections for many wireless systems). $646.00 - See more - Buy onlineOn orderSee larger image | | 
Musiciansfriend | AMT Electronics AMT P800 Low Profile Clip-On Condenser Trumpet MicrophoneThe AMT P800 Trumpet microphone system is the only system on the market specifically made to handle the highest SPL levels that a trumpet reproduces. The AMT P800 microphone system features an element somewhere in size between a small and large diaphragm, which prevents even the loudest of trumpet players to not overload the microphone. AMT has developed their special "Off the bell" clamping system for this model which clamps to the lead pipe of the trumpet or flugelhorn. The AMT P800 allows the player to easily change to and from AMT different preamps and allows for direct connections to either Shure or Sennheiser belt pack transmitters. With a change in a cable, convert your P800 trumpet mic from a beltpack style preamp, to a "Studio" series model, and then to AMT "W"ireless setups. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. Phantom power or 9-Volt battery is required. Comes with AP40 floor or "DI" style preamp, hardshell case, and AMT disconnecting cable technology to allow the microphone to be used as "Wireless" or "BP" models if needed. (Additional cables for a variety of setups sold separately. The AMT Interface is also sold separately to allow connections for many wireless systems.) $661.00 - See more - Buy onlineOn orderSee larger image | | 
Musiciansfriend | AMT Electronics AMT TA2 Studio Clip-On Double Microphone SystemThe AMT TA2 Studio Clip-On Double Microphone System includes two AMT TA2 low profile condenser microphones and the AMT AP40 Preamp. The AMT TA2 is a low profile double condenser microphone that attaches to the bell with a low mass clip specifically designed soprano or baritone saxophone. The TA2 microphone provides pure tonal reproduction while being unobtrusive. It's an excellent choice for a principal artist or soloist.The microphone attaches to the bell of instrument, the top or over the keys microphone is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise. The second microphone is placed in front of the bell of the microphone. Both microphones are on goosenecks for optimal placement. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.The AP40 Preamp converts all of the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or musical instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application. There is a L / G switch on the preamp. This is a Ground Lift switch. If phantom power is not regulated for the correct voltage OR if phantom is reduced by the addition / amount of other condenser microphone connected, the switch disconnects the phantom power and allows it's own battery supply to power the preamp. If the switch is moved to the L position, the preamp is powered by the battery. If the switch is in the G position, phantom will power the preamp. The output of the preamp is an XLR Low Impedance balanced output. $693.00 - See more - Buy onlineIn stockSee larger image | | 
Musiciansfriend | AMT Electronics AMT P800 Studio Low Profile Clip-On Trumpet Microphone SystemThe AMT P800 Studio microphone system combines the most natural sounding trumpet specific microphone system on the market with the AMT AP40 floor pre-amp. The AP40 converts the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application. The output of the preamp is an XLR Low Impedance balanced output. The output sends signal at Mic Level.The AMT P800 Studio Trumpet microphone system features an element somewhere in size between a small and large diaphragm, which prevents even the loudest of trumpet players to not overload the microphone. AMT has developed their special "Off the bell" clamping system for this model which clamps to the lead pipe of the trumpet or flugelhorn. The AMT P800 microphone allows the player to easily change to and from AMT different preamps and allows for direct connections to either Shure or Sennheiser beltpack transmitters. With a change in a cable, convert your P800 from a "Studio" style preamp, to a "Belt pack" series model, or to the AMT "W"ireless setups. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. Phantom power or 9Volt battery required. Comes with AP40 floor or "DI" style preamp, hardshell case, and AMT disconnecting cable technology to allow the microphone to be used as "Wireless" or "BP" models if needed. (Additional cables for a variety of setups sold separately. The AMT Interface is also sold separately to allow connections for many wireless systems.) $742.00 - See more - Buy onlineOn orderSee larger image | | 
Musiciansfriend | Manley Gold Reference Stereo MicrophoneThe Manley Gold Reference Multi-Pattern Microphones give you truly accurate musical recordings. The Gold Reference Series employ Manley's own design of large capsules (1.25 inch overall, 1 inch diaphragm diameter), which are executed to precise tolerances made possible by modern micro-milling machinery available today. The capsule rings and back-plates are milled from solid brass. The gold diaphragm film comes from Germany and is tensioned using proprietary techniques by David Josephson ensuring capsule-to-capsule constancy, combined with the speed, "air", and superb ultra-high frequency response you have only dreamt about.The stereo version of the Manley Gold Reference microphone is identical in every respect to the Mono Gold Reference but with two complete and carefully matched systems installed in one case with the upper capsule being fixed and the lower capsule being continuously rotatable through 90° for M-S and X-Y Blumlein-Style coincident pair recording technique. Each capsule has its own continuously variable pattern control and individual -10dB PAD switch.The all-tube electronics in the Manley Reference Series Microphones are built around two triodes in cascade forming an entire gain-block. Manley has recently switched to a dual-triode 12AX7WA, easily obtainable and replaceable, mounted in a ceramic socket. The output is coupled through a MANLEY output transformer of unparalleled quality and substantial physical size employing nickel laminations with "hum bucking" bi-filar windings, encased in mu-metal. The polar pattern control is continuously variable between the OMNI, CARDIOID, and FIGURE 8 positions vastly increasing this mic's versatility. The Gold Mics make it possible to exactly tailor the proximity effect to achieve the desired character. Manley has chosen a very open weave stainless-steel grille for the capsule window which allows all the highs to reach the capsule unimpaired letting the engineer choose if, when, and how much pop screen is appropriate. As a result, the Reference Gold reaches to the furthest extremes of highs and lows with gorgeous natural acoustic smoothness. Some engineers tell us it sometimes "hears" more than they do!The base of the microphone holds a locking 5 pin gold XLR connector for the audio signal out enabling usage of your own preference of audio cable â€' as exotic as you wish . A low capacitance 5-pin XLR-F to two 3-Pin XLR-M "Y" cable is included for your convenience. A detachable threaded 4-pin connector for the 30 foot power supply cable carries the stringently filtered B and regulated heater voltages from the separate dedicated power supply. The microphone body is machined from brass providing excellent shielding properties, polished to a high lustre, then plated with 24 karat gold for an impressive finish, inspiring confidence in artists and producers.Manley's precision suspension system is provided with each Reference Micr $7200.00 - See more - Buy onlineOn orderSee larger image | |
|
|
 (EUROPEAN COMPANY) : AMT | 
Tasset | Micro universel AMT System 1The System 1 is a low profile condenser microphone that attaches to the bell of any flanged bell instrument such as woodwind and brass, with a LOW MASS clip. It can also clamp to many other instruments using the AMT "Universal Clamp". The microphone provides pure tonal reproduction while being unobtrusive. The System 1 microphone element is designed to be used with 40 or more instruments. It's response is designed to complement everything from brass and woodwinds to percussion. See the list below of all possible instruments to use it on.
With the included clip portion of the "Universal Clamp", the System 1 can be used on soprano, alto, tenor and bari sax, as well as trumpet, trombone, baritone horn, flugelhorn and tuba. The clip portion of the "Universal Clamp" is used for flanged bell instruments such as brass and woodwinds. It is a spring loaded design with a set screw that can reinforce stability on the horn if the player needs. The microphone attaches to the bell of instrument, and is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise.
The AMT System 1 features a flexiable gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.
The System 1 is terminated by a 3.5mm plug which connects to a special metal belt pack preamp. The included belt pack has an XLR output. It is power by either 1 AA battery or phantom power. The belt pack powers the microphone system appropriatly and needs to be used.
Use it with : Soprano sax, Alto sax, Tenor sax, Bari sax, Trumpet, Trombone, Baritone Horn, Fluglehorn, Tuba
Euphonium, Sousaphone, Piccolo, C Flute, Alto Flute, Bass Flute, Banjo, Cornet, Pocket Trumpet, Violin, Viola, Mandolin, French Horn, Recorder, Eb Soprano Clarinet, Bb Clarinet, Alto Clarinet, Oboe, English Horn, Conga, Timbales, Djembe, Glockenspiel, Tympani, Bongos, Snare Drum, Tom-Toms, Steel Drum. EUR - See more - Buy online
See larger image | |
|
[ 1 - 40 ] |
|
Version française 
