|
|
(AMERICAN COMPANIES) : CROWN
Prices may have changed on the official site. | Next page >> [ 1 ] 
Musiciansfriend | Crown Sound Grabber II PZM Condenser MicrophoneThe Crown Sound Grabber II PZM Condenser Microphone is a Pressure Zone Microphone (also called a boundary mic) that makes the most of a unique behavior of sound waves when they meet a flat surface. Picks up sound from entire room with great accuracy and prevents phase cancellation. Back to back, 2 of them make a fantastic stereo rig.The Crown Sound Grabber II is ideal for applications such as conferences, group discussions, interviews, home video production, lectures, and recordings. The mic can be placed on a large surface such as a table, floor, wall, or lectern. Powered by AAA battery. Comes with mini phone plug and plug adapters. $69.99 - See more - Buy onlineIn stockSee larger image
Tech. specifications (PDF) | | 
Musiciansfriend | Crown Sound Grabber II PZM Condenser Microphones - Pair
 This Pressure Zone Microphone (also called a boundary mic) makes the most of the unique behavior of sound waves when they meet a flat surface. Picks up sound from entire room with great accuracy and prevents phase cancellation. Back to back, 2 of them make a fantastic stereo rig.Ideal for applications such as conferences, group discussions, interviews, home video production, lectures, and recordings. The mic can be placed on a large surface such as a table, floor, wall, or lectern. Powered by AAA battery. Comes with mini phone plug and plug adapters. $129.98 - See more - Buy onlineIn stockSee larger image
Tech. specifications (PDF) | | 
Musiciansfriend | Crown PZM30D Boundary MicrophoneThis Crown PZM30D Boundary Microphone is a Pressure Zone Microphone designed for pro recording, sound reinforcement, and broadcasting. It has many applications, miking anything from full orchestras to individual instruments. Dual frequency response is switchable between rising (R) and flat (F). The R setting delivers the crisp attack needed for piano and percussion while the F setting offers smooth, flat, high-frequency response.With a frequency response of 20Hz to 20kHz and a maximum SPL of 150dB it can handle just about any sound capture chore you throw at it. $269.99 - See more - Buy onlineIn stockSee larger image
Download manual (PDF) | | 
Musiciansfriend | Crown CM-311AESH Headset Wired for ShureLight-weight and unobtrusive with full, clear sound.
Designed for touring and live-sound applications, the Crown CM-311AESH is a rugged head-worn microphone with unequaled performance. It sounds like the best handheld microphones — full, clear, and distortion-free, even with the loudest singers.
The CM-311AESH is the latest version of Crown's proprietary Differoid technology. Its cardioid pickup pattern rejects sounds from the rear, such as floor monitors. Its noise-canceling ability rejects sounds at a distance, such as instruments on stage and crowd noise. This results in the CM-311AESH having outstanding gain-before-feedback and isolation.
Lightweight and comfortable, the mic's headband and boom adjust to fit any singer. An included pop filter greatly reduces breath noise and pops. Because of the boom's unique behind-the-ear design, it does not cover up the singer's face.
NOTE: Putting an XLR connector on the CM-311AESH and connecting to a mic input with phantom power WILL damage the mic element.
Crown CM-311AESH Headset Wired for Shure Specifications:
•Transducer type: Electret condenser.
•Frequency response (typical): 50 Hz to 17,000 Hz
•Polar pattern: Cardioid
•Impedance: 6 kilohms unbalanced.
•Recommended load impedance: 10 kilohms
•Open-circuit sensitivity, typical, close-talking: CM-311AE, 1.25 mV/Pa ( 58 dB re 1V/Pa).
•Power sensitivity, typical, close-talking: 71.5 dB re 1 mW/Pa.
•Equivalent noise level (self noise): 26 dB SPL typical (0 dB = 0.0002 dyne/cm2), A-weighted.
•S/N ratio: 68 dB at 94 dB SPL.
•Maximum SPL: 140 dB SPL with 3V DC, 148 dB
•SPL with 9V DC.
•Operating voltage: 3 9V DC from the transmitter's battery.
•Polarity: Positive pressure on diaphragm produces positive voltage on shield with respect to white lead.
•Current drain: 0.27 mA nominal.
•Off-attenuation: 70 dB.
•Output connectors: supply your own to match your transmitter.
•Cable: In-line with this cable is a small circuit module that equalizes the microphone signal. Cable is 42-inches (106.68 cm) long from headband to module, 12-inches (30.48 cm) from module to cable end. 2-conductor shielded unbalanced cable, un-terminated.
•Materials: High-impact plastic mic housing, brass boom, steel wire headband
•Net weight: Head-worn mic, 2.1 oz (61 g)
•Dimensions: Headband 5.5-in. (13.97 cm) diameter, adjustable. Boom approximately 7 in. (17.78 cm) x 3 in. (7.62 cm). See Figs. 3 and 4.
•Included accessories: Microphone carrying case, WS-6 foam pop filter, clothing clip.
Crown CM-311AESH Headset Wired for Shure Features:
•Full, clear, distortion-free sound
•Outstanding gain-before-feedback and isolation
•Connects to most wireless transmitters $269.99 - See more - Buy onlineOn orderSee larger image
Tech. specifications (PDF) | | 
Musiciansfriend | Crown PCC-160 Boundary MicrophoneThe Crown PCC-160 Boundary Mic is a great mic for theater, large-group performances, lecterns, and happenings. Supercardioid pattern with PCC boundary technology assures phase coherence throughout the audible spectrum, with sensitivity increased by 6dB. $289.99 - See more - Buy onlineIn stockSee larger image | |
|
|
 (EUROPEAN COMPANY) : CROWN | NO RESULT
|
|
|
Version française 
