Behringer 130 Dual VCA Eurorack Module
-
Analogue 2-channel VCA
-
Per channel: Mixer with 3 adjustable inputs, 3 CV inputs with attenuator, gain control, 2 signal outputs (low/high) and switch between linear and exponential characteristics
-
Current consumption: 30mA ( 12V) / 20mA (-12V)
-
Width: 16 HP
Behringer 112 Dual VCO Eurorack Module
-
Contains two identical analogue VCOs
-
Waveforms: triangle, sawtooth and square/pulse
-
Adjustable pulse width and PWM CV input with attenuator
-
Octave selector and fine-tune control
-
Hard- and soft-sync
-
3 Pitch CV inputs with attenuators
-
Current consumption: 130 mA ( 12 V) / 70 mA (-12 V)
-
Width: 16 HP
-
Depth: 46 mm
Behringer 140 Dual Envelope/LFO Eurorack Module
-
Two independent analogue ADSR envelopes
-
For each envelope: manual trigger button, gate input, fader for attack, decay, sustain and release
-
2 Signal outputs and inverted output
-
Analogue LFO with 5 waveforms
-
Fader for frequency and delay time
-
Three frequency ranges selectable (0.05 - 30Hz)
-
CV and trigger input and 2 signal outputs
-
Current consumption: 40mA ( 12V) / 40mA (-12V)
-
Width: 16 HP
-
Depth: 44 mm
Behringer 121 Dual VCF Eurorack Module
-
Authentic reproduction of the original "System 100M" circuitry
-
2 Low-pass filters with cut-off frequency and resonance control
-
Each filter has 3 audio outputs and 3 CV inputs with attenuators
-
Each VCF has an additional switchable 3-mode high-pass filter
-
3-Channel mixer per VCF allows independent mixing of all input signals
-
Current requirement: 40 mA 12 V, 40 mA -12 V
-
Width: 16 HP
Behringer 150 Ring Mod/Noise/SandH/LFO Eurorack Module
-
Analogue ring modulator
-
Noise generator with two outputs for white noise and pink noise
-
Sample and hold unit with clock out, external clock in and fader for clock rate and lag time
-
Analogue LFO with 5 waveforms
-
Fader for frequency and delay time
-
Three frequency ranges selectable (0.03 - 30Hz)
-
CV and trigger input and 2 signal outputs
-
Current consumption: 60mA ( 12V) / 50mA (-12V)
-
Width: 16 HP
-
Depth: 44 mm
Behringer Eurorack 104 Eurorack empty housing
-
Compact empty housing for synthesizer modules and accessories in a 3 U format
-
Sturdy aluminium frame with wooden side walls
-
Width: 104 HP
-
maximum depth: 38 mm (1.5")
-
Easy positioning of modules using 52 sliding nuts (included)
-
Large rubber feet are secure and non-sliping on most surfaces
-
Dimensions (W x H x D): 546 x 84 x 133 mm
-
Weight: 1.2 kg
-
Design and development in the UK
Behringer CP1A Power supply module for Eurorack systems
-
Control LEDs for 12 V, -12 V and 5 V.
-
Slots for 2 Flying Bus Boards with 7 slots each
-
Output: 1 A ( 12 V) / 1 A (-12 V) / 0.5 A ( 5 V)
-
Width: 4 HP
-
Depth: 52mm
-
Includes external power supply unit (13 V DC, 3 A), 2 Flying Bus Boards with 7 slots each
2x the sssnake DD1030 Patch Cable Set
-
Mini jack mono to Mini jack mono
-
Length: 30 cm
-
Set of 6 cables
EUR 333.00 - See more - Buy online 
Version française
(EUROPEAN COMPANY) 