2x QSC KS118 Active 18" Subwoofer
-
3600 W Class D amplifier module
-
direct radiating 18" long excursion direct radiating driver
-
Frequency response: 35 - 111 Hz
-
Max. SPL (sound pressure level): 136 dB
-
Nominal coverage angle: Omnidirectional (360°) or cardioid - Cardioid setup requires at least 2x KS118 units
-
DEEP mode
-
Multi-functional display
-
Adjustable crossover and delay
-
Gain control
-
Signal LED
-
Limiter LED
-
Power LED
-
High-performance DSP
-
2 XLR/Jack combo line inputs for channels A and B
-
2 XLR/M outputs for channels A and B
-
Vertical and horizontal deployment possible
-
M20 threaded pole receiver
-
18 mm Birch plywood housing with impact-resistant lacquer finish
-
4 Heavy-duty casters
-
LOCK power cable (length: 3 m)
-
Dimensions including casters (H x W x D): 640 x 520 x 785 mm
-
Weight: 47 kg
-
Colour: Black
-
Suitable cover available under Article Nr 475505 (not included)
2x QSC kW 122 2-Way Full-Range Active Speaker
-
1,000 watt Class D amplifier output power
-
2,000 Watt Hi-Peak Amplifier Output Power
-
Assembly: 12" Woofers and 1.75" voice coil
-
Dispersion: (-6 dB): 75° axis-symmetrical
-
Frequency range (-10 dB): 50 - 20000 Hz
-
Max. Sound pressure level (1m): 131 dB
-
Built-in two-channel mixer
-
Channel A Input: XLR / jack combi jack, Mic / Line input switchable: Mic 24dB / 36dB with MIC LED or line: 0dB / 12dB, gain control, signal LED
-
Channel A Output: XLR
-
Channel B Input: XLR / jack combo socket and 2 x RCA jacks L / R, line input, gain control, signal LED
-
Channel B Output: XLR
-
Channel A + B Output: XLR
-
Remote volume control via Euro-jack of several loudspeakers for installation application
-
DSP corrects non-linear distortions
-
EQ modes "DEEP" for rich bass without sub and "vocal" for precise voice reproduction
-
"GuardRail" protects power amplifier without switching off
-
Slanted monitor angle: can also be used as floor monitor: can also be used as floor monitor
-
35 mm Pole sockets with Tilt-Direct: 0° / -7.5°, e.g. Art.323921
-
Speaker grille made of powder coated steel
-
Housing made of 15 mm birch multiplex with aluminum handles
-
6 x M10 Mounting points for flying suspension
-
Slip resistant feet
-
Locking power cable, length: 3 meters (C13 / protective contact)
-
Low power consumption: up to 8 KW series loudspeakers can be operated on a 10A / 230V standard line
-
Auto standby mode
-
Dimensions (H x W x D): 660 x 381 x 391 mm
-
Weight: 22.2 kg
-
Six years manufacturer's warranty upon product registration
-
Suitable protective cover KW122 Outdoor Cover available: Art.260336 (not included)
2x QSC KS118 Cover Protective cover
-
For QSC KS 118
-
Made of hard-wearing and weather-proof nylon
-
With protective padding
-
Cable compartment
-
Colour: Black
2x QSC KW 122 Cover Cover
-
For KW 122
-
With cable compartment
2x K&M 21368 "Ring Lock" Distance Rod
-
Adjustable height
-
With M20 thread bolt
-
Steel rod for connection of speaker-satellite systems
-
Patented expanding mandrel system for a secure, stable and quiet connection of satellite systems.
-
Vibration-free connection
-
Ring lock
-
Extendable from 1100 - 1800 mm
-
Weight: 3.2 kg
2x pro snake 17840 High Quality Microphone Cable
-
Profile: 2 x 0.22 mm˛
-
With Neutrik XLR male/female connectors
-
Colour: Black
-
Length: 3 m
-
Made in Germany
EUR 7359.00 - See more - Buy online 
Version française
(EUROPEAN COMPANY) 
