| Enttec : DMX USB Pro Interface Bundle
Enttec DMX USB Pro Interface DMX USB Interface -
512 DMX channels (1 universe) either as input or output -
Fully compliant with USITT DMX512-A -
Output refresh rat ≈ $218.66 188.00€ - Sold by Thomann - 1 seller - 2 offersIn Stock (24 hours) ZoomSimilar Items |
|
| MA Lighting : grandMA3 onPC 2Port Node 2k P
(3 comments)
Ethernet Interface- PoE variant (power over ethernet) - In combination with grandMA3 onPC, it unlocks 2,048 parameters and provides two frame-synchronised DMX outputs - Perfect ≈ $1976.11 1699.00€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| Botex : NETcon 8-3
(25 comments)
Bidirectional Art-net Node- Configure via integrated display directly on the device - RDM capable - Adjustable DMX repetition rate (10-40 Hz) - 4096 Channels / eight DMX un ≈ $387.31 333.00€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| Enttec : Storm 10
- Supports Art-Net, sACN and ESP Ethernet protocols - 1x RJ45 Ethernet input port (10/100 Mbit/s) with integrated LED network status indicator - 12 x DMX/RDM output ports in total: 10x ≈ $811.84 698.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Work : LightShark LS-1 Node4
(5 comments)
Ethernet Interface- Fully compatible with LightShark consoles - Single mode mode: RDM / DMX to ArtNet / sACN transceiver - Merger mode: where the LS-Nodes can receive different ≈ $446.63 384.00€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| Botex : NETcon 8-5
(19 comments)
Bidirectional Art-Net Node- Configure via integrated display directly on the device - RDM capable - Adjustable DMX repetition rate (10-40 Hz) - 4096 Channels / eight DMX un ≈ $387.31 333.00€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| Enttec : Open DMX USB Interface Bundle
Bundle offer comprising
Enttec Open DMX USB Interface
Control unit
- DMX USB interface is an inexpensive and popular solution for converting a DMX si ≈ $91.88 79.00€ - Sold by Thomann - 1 seller - 2 offersIn Stock (24 hours) ZoomSimilar Items |
|
| ETC : Gadget II
(3 comments)
DMX Interface- 4267A1004 - For two universes from USB to 2x XLR - Can be connected via USB to any computer - Can only be used with a PC or Mac-based ETCnomad dongle - ≈ $417.55 359.00€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| Chamsys : GeNetix GN2 2 Port Node
2-Port Ethernet-DMX-Node- 2 RDM DMX ports for input and output - Supports Art-Net & sACN - Web server for remote configuration - Built-in display and encoder for local conf ≈ $964.21 829.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Work : LightShark LS-1 Node1
Ethernet Interface- Fully compatible with the LightShark consoles - Single mode mode: RDM / DMX to ArtNet / sACN transceiver - Merger mode: where the LS-Nodes can receive differ ≈ $273.33 235.00€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| ChamSys : GeNetix GN10 10R Port Node
Installation Node
With Ethernet RJ45 connections (R variant)
10 RDM DMX ports for input and output
Supports Art-Net and sACN
LTC and MIDI timecode via Ethernet
MIDI notes over Ethernet
Web server for ≈ $1603.91 1379.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| American DJ (ADJ) : NET 8
(2 comments)
DMX Ethernet Node- 8-Port for ArtNet, sACN - DMX and RDM protocols - DHCP or static IP address - 1.7" LCD display - Configurable from the menu or web browser - Et ≈ $405.92 349.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Obsidian : NX DMX
(7 comments)
DMX USB interface- Can be used with Onyx for PC software, all Obsidian series consoles and LightJockey - Enables bidirectional RDM communication, with which the settings or addresses ≈ $417.55 359.00€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| Obsidian : Netron RDM10
1.821 / 5.000 Obsidian Netron RDM10; 2-to-10 DMX splitter with flexible routing and a 2-port EtherNet node with full RDM support; features two DMX inputs that can be flexibly routed to one or more of ≈ $964.21 829.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| ChamSys : GeNetix GN10 10P Port Node
Installation Node
With Phoenix screw terminals (P variant)
10 RDM DMX ports for input and output
Supports Art-Net and sACN
LTC and MIDI timecode via Ethernet
MIDI notes over Ethernet
Web server for re ≈ $1731.86 1489.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Swisson : XND-8R3 ENode 19" 8 Port 3-pol
Converters from Art-Net and sACN to DMX for up to 8 independent universes.- Art-Net I, >II and 3 (DMX and RDM) - sACN release and draft version - Up to 8 individually optically ≈ $1603.91 1379.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Enttec : DMX USB Pro Interface
(395 comments)
- 512 DMX channels (1 universe) either as input or output - Fully compliant with USITT DMX512-A - Output refresh rate configurable from 1 to 40 FPS - Configurable MAB and break ti ≈ $195.4 168.00€ - Sold by Thomann - 1 seller - 2 offersIn Stock (24 hours) ZoomSimilar Items |
|
| Eurolite : DXT PoE Art-Net Node I
(7 comments)
Art-Net Interface for Controlling 512 DMX Channels- etherCON network socket with PoE - Power supply via 48V PoE switch/PoE injector (802.3af) or 5V USB-C port - Input and output ≈ $180.28 155.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Showtec : NET-8/5
(9 comments)
8 Channel Artnet/ Klingnet Node- Network router that can convert artnet to DMX-512 signals and vice versa - A maximum of 4096 channels can be transmitted using a single CAT5 cable
≈ $579.22 498.00€ - Sold by Thomann
In Stock (24 hours)
Zoom
Similar Items |
|
| Eurolite : USB-DMX512-Interface/Update-Ad
(55 comments)
Compact USB DMX Interface for Beginners- Allows control of DMX devices with a computer - Suitable for a variety of DMX software applications such as FreeStyler, DMXControl and PC_DIM ≈ $60.48 52.00€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
Version française
