| Fender : Roadworn Tele String Guide
(18 comments)
String Guide- For Telecaster - Round ≈ $12.2 10.50€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| Schaller : Speed Knob Frustum C
(42 comments)
Set of Potentiometer Knobs- Design: truncated cone - 25 mm - Material: Brass - Bore diameter: 6.1 mm - Dimensions (L x W x H): 24.5 x 24.5 x 12 mm - Finish: Chrome ≈ $17.77 15.30€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Guitar Monkey : CryoVibe Std. Tremolo 5x
Set of 5 Tremolo Springs
Standard tension (medium springback)
Made of high-quality spring steel
Nickel finish
Suitable for all common tremolo systems
Even return springback
Finish: Silver
Made in Kore ≈ $28.58 24.60€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Sonor : 12" Rim Metal Snare Reso 8Loch
(7 comments)
Hoops- 12" Hoop, metal - 2.3 mm - For 8 tuning lugs - Bottom ≈ $30.2 26.00€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| TonePros : AVR2 2/N
(18 comments)
Tune-O-matic Bridge- Locking - For vintage LP/SG/335 - Replacement for ABR-1 - Bolt distance: 7.36 cm - Longer and improved sustain - Colour: Nickel - Includ ≈ $73.19 63.00€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| Göldo : ASNUT Slide Saddle
(131 comments)
Slide Saddle- Extension saddle - Just relax the strings and place the extender over the saddle, lifting the strings approximately 6 mm above the fingerboard and further apart ≈ $10.11 8.70€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Allparts : Certano T-Bender Bridge C
(1 comments)
Bender Bridge- For T-style guitars: pull the B or G string up a half or whole tone to achieve realistic pedal steel sounds - Drop-in replacement for most vintage-spec T-style bodies< ≈ $342.7 295.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Allparts : Tremol-No Small Clamp
(214 comments)
Tremol-No - New Tremolo Locking Device- Especially suitable for Ibanez tremolos - 3 Different modes: Hardtail, Dive Only, Floating Mode - Small clamp - Allparts No.: BP-200 ≈ $102.23 88.00€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| TonePros : MSPRS N Metric Brass Studs
(1 comments)
Mounting Bolts For P-Style Wraparound Bridges- Brass sleeves - Designed like TonePro's SM1 Locking Studs, but with an attractive, larger stud cap - Specially designed for the P- ≈ $52.28 45.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Pure Tone : Stereo Output Jack Gold
(8 comments)
6.3 mm Mono Jack Socket- Unlike the single contact point of a standard mono jack, the Pure Tone jack has two contact points each for the tip (positive pole) and the ring (negative pole)
≈ $13.13 11.30€ - Sold by Thomann
In Stock (24 hours)
Similar Items |
|
| Harley Benton : Radius Gauge Smooth 2-Set
(101 comments)
Guitar making tool- Universal tool for precise guitar and bass adjustment - For precise measurement and adjustment of the fretboard radius - Suitable for fingerboards from 66.7 ≈ $10.34 8.90€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| Michael Rath : R10 Leadpipe 10A
(1 comments)
Michael Rath R10 Mouth Pipe
Model: 10A ≈ $177.74 153.00€ - Sold by ThomannOn orderSimilar Items |
|
| Göldo : PG05W Pickguard ST HSH WH
(32 comments)
Pickguard- For ST models - HSH version: for 2 humbuckers and 1 single coil - Colour white - 3-Ply ≈ $25.09 21.60€ - Sold by ThomannOn orderSimilar Items |
|
| dAndrea : J-Style Pickguard Vint. Pearl
(16 comments)
Pickguard- Suitable for J-style electric basses - Material: Celluloid - 3-Ply - 10 Screw holes - Colour: Vintage pearl - Made in USA ≈ $27.42 23.60€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| TAD : 500k Push/Pull Poti
(51 comments)
- Logarithmic - Long thread - With knurled shaft - Thanks to the dual switch, many combinations are possible such as series/parallel, out-of-phase, coil tab etc. - Diameter: ≈ $14.75 12.70€ - Sold by ThomannIn Stock (24 hours) ZoomSimilar Items |
|
| Harley Benton : Parts T-Style Modern Jackplate
(48 comments)
- Aluminium - Chrome - Socket thread inside 8.3mm, - Suitable mono socket article 284050 not included ≈ $4.51 3.88€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Fender : 70´s Style Bass Machine Head
(58 comments)
- Configuration: 4 In Line - 70's style - Usable shaft length: 21 mm - Total shaft length: 31 mm - Shaft diameter: 14 mm - Bore: 17.5 mm - With "Fender" embossing
≈ $115.01 99.00€ - Sold by Thomann
In Stock (24 hours)
Zoom
Similar Items |
|
| Gerd Dowids : Valve Cap 33 g BZ
(3 comments)
Valve cover- Suitable for Zirnbauer rotary valve machines - Heavy design - Weight: 33 g ≈ $51.11 44.00€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Yamaha : Valve Spring Tpt., Cor.
(64 comments)
Yamaha Valve Spring- For trumpet and cornet - Diameter: 9 mm - Length: 39 mm - 1 piece ≈ $2.31 1.99€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
| Allparts : CTS250K Pot
(225 comments)
Potentiometer- Resistance: 250 kOhm - Resistance curve: logarithmic - CTS pots are used on many American guitars - Low tolerance for less dispersion and more accuracy ≈ $11.27 9.70€ - Sold by ThomannIn Stock (24 hours)Similar Items |
|
Version française
