Meinl TMDDG Pro Didgeridoo Stand

4

Support de didgeridoo

  • Permet de jouer du didgeridoo assis ou debout
  • Trépied double embase
  • Surface de pose rembourrée avec sangle réglable
  • Hauteur réglable de 600 à 950 mm
  • Angle d'inclinaison réglable
Référencé depuis Mars 2023
Numéro d'article 557191
Conditionnement (UVC) 1 Pièce(s)
Pied/support pour: Didgeridoo
185 €
Tous les prix TVA incl. (TTC)
Disponible immédiatement
Disponible immédiatement

Cet article est disponible en stock et peut être envoyé immédiatement.

Informations sur l'expédition
Livraison gratuite estimée entre le Jeudi, 2.05. et le Vendredi, 3.05.
1

4 Évaluations des clients

4.8 / 5

Vous devez être connecté afin de pouvoir évaluer un produit.

Note: Afin d’éviter que les évaluations de notre site soient polluées par des “ouï.dire”, des approximations ou encore de la publicité clandestine, nous autorisons uniquement nos clients à évaluer les produits achetés chez nous.

Une fois connecté, vous trouverez dans votre compte client, via le lien "Évaluer des produits", tous les articles que vous pouvez évaluer.

Utilisation

Stabilité

Qualité de fabrication

3 Commentaires

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
n
Very solid and high-quality stand
nikreiman 12.09.2023
If you have a heavy didgeridoo then this stand works great and offers a wide variety of playing angles both for sitting and standing. I'm a tall guy (2m) and was pleased that the stand can be raised high enough for me to play standing up (note: for this to work it would also depend on the length of your didge and the preferred playing angle).

I only have a few gripes with this stand, hence the 3-star rating for "handling":

- There is a knob that changes the angle from vertical to horizontal, which I often use to change between an upright storage position and angled for playing. This knob is a bit stiff and it can be a bit of work to adjust the angle. However, it's probably good that it's stiff or else the stand wouldn't be as stable.
- The seat-belt fastener that holds the instrument in place is too short. My didge is relatively thick as well, so I'm not sure how thick of an instrument they were hoping to support. I had to cut this strap in order to make anything fit, which ruled out any possibility of a return.
- Conversely, the two hooks at the bottom which hold the base into place need to be bent into shape to support the instrument. Fortunately the metal is soft enough that you can bend it by hand, but it would be nice if this was easily adjustable or if there was just a single (thicker) hook.

Overall, it's a great stand and is extremely stable.
Utilisation
Stabilité
Qualité de fabrication
0
0
Signaler l'évaluation

Signaler l'évaluation