PSI Audio AVAA C20 Black

12

Absorbeur de basses actif

  • Absorbe les modes de pièce entre 15 et 150 Hz
  • Le temps de réverbération est significativement réduit dans cette gamme de fréquence
  • L'efficacité correspond à un absorbeur de 25 fois la taille
  • Pas d'étalonnage ou d'ajustement à la pièce requise
  • Solution mobile et flexible
  • Couleur: noir
  • Dimensions: 424 x 509 x 300 mm (LxHxP)
  • Poids: 13 kg
Référencé depuis Février 2018
Numéro d'article 433097
Conditionnement (UVC) 1 Pièce(s)
Matériau N/A
Couleur Noir
Dimensions pièce en mm 424 x 509 x 300
2.579 €
Envoi gratuit et TVA incluse.
Disponible immédiatement
Disponible immédiatement

Cet article est disponible en stock et peut être envoyé immédiatement.

Informations sur l'expédition
Expédition estimée le Samedi, 30.03.
1

12 Évaluations des clients

4.8 / 5

Vous devez être connecté afin de pouvoir évaluer un produit.

Note: Afin d’éviter que les évaluations de notre site soient polluées par des “ouï.dire”, des approximations ou encore de la publicité clandestine, nous autorisons uniquement nos clients à évaluer les produits achetés chez nous.

Une fois connecté, vous trouverez dans votre compte client, via le lien "Évaluer des produits", tous les articles que vous pouvez évaluer.

Qualité de fabrication

12 Commentaires

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
t
The ultimate weapon on the bass front
tdd587 18.04.2018
The AVAA is basically a pressure cancelling device working in the lower frequency domain. All you have to do is to find a good spot where the pressure is maximized, turn it on and you are done. The result will heavily depend on the selected location. If the room modes are evenly distributed in your room (you have a room with good ratios), then the effect can be somewhat limited. But if your room has poor ratios (concentrating room modes into single locations), then the AVAA can help you a lot.
The area of effect of the unit is large but still limited, e.g. in my case a whole corner is problematic from top to bottom, which means only 2 units can cover it properly. Unfortunately there is no mounting option, so you have to figure out in this case how do you put the unit (13kg) 1.5m high above the ground.
With 2-3 units the measurements show night and day difference in the whole bass region - frequency and time domain as well. This is indeed the ultimate weapon against room modes. Of course you still have to treat your room for reflections, SBIR etc.

Pros:
- built like a tank
- no setup required
- no sound is emitted, no DSP involved
- works like a tuned absorber, but in ALL frequencies from 15Hz (!) up to 150Hz
- future proof: works in any room, can be relocated easily if conditions/requirements change over time
- the area of effect is much larger than the unit itself or a single tuned absorber

Cons:
- no mounting option
- high unit price
- a single unit most probably won't be enough
- confined spaces, close large objects can make it unstable (yes, this is true)
Qualité de fabrication
20
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
m
Mastering the low-end frequency response was always troublesome.
mlez 27.09.2022
DIY bass traps, expensive factory-made passive traps, room correction softs, I tried it all. Some frequencies were still a pain because most of us (home)studio owners do not have the budget to build a mastering room from scratch. So some bass reflections keep disturbing the sound flow in the mix and mastering.

Having said that, we have to consider the price of the PSI Audio AVAA C20, knowing we have to buy at least two of them. You need one in each corner, ideally. That's a very heavy load on our savings, but...
You only have to buy them once!
Passive bass traps are made for the room specifically, and as soon as you change anything, like your mixing position or some furniture, your bass trap has to be adjusted. Let alone if you relocate your business to a larger or smaller room.

With the PSI Audio AVAA C20 one can just put it in the corner and it will adjust itself to the new situation without complaining.
My low-end frequency response is cleaner and steadier. I even remastered some older tunes just for the fun of relistening through them and re-releasing them on the streaming services again because of the improvements I heard.
A lot of money? Yes, but it was worth it.
Qualité de fabrication
5
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
y
Like a miracle.
ywshuo 24.05.2020
I had some phasing issues in my studio. Heard about AVAA and ordered two to try out and it worked miraculously. I can hear more solid and focused bass than before.
Qualité de fabrication
1
0
Signaler l'évaluation

Signaler l'évaluation

google translate gb
Une erreur est malheureusement survenue, veuillez réessayer ultérieurement svp.
ES
Great Item
Elite Squad 22.07.2022
Great Solution for low frequency waves
Qualité de fabrication
1
0
Signaler l'évaluation

Signaler l'évaluation

Vidéos YouTube associées